Honda 08E91-E22-100A Installation Instructions Manual page 13

42. Loosely attach the engine starter harness to the
vehicle harness with one wire tie.
ENGINE STARTER
HARNESS
43. Disconnect the vehicle 20-pin connector from the
fuse box, and plug it into the engine starter harness
20-pin connector. Plug the remaining engine starter
harness into fuse box 20-pin connector.
VEHICLE
20-PIN
CONNECTOR
ENGINE STARTER HARNESS
20-PIN CONNECTOR
© 2008 American Honda Motor Co., Inc. – All Rights Reserved.
VEHICLE HARNESS
WIRE TIE
(Attach loosely.)
6D1824AY
FUSE BOX
VEHICLE
20-PIN
CONNECTOR
ENGINE STARTER
HARNESS
6D1825AY
AII 38576-38846 (0802)
44. Attach the clip from the engine starter harness
connector to the clip on the vehicle connector.
45. Remove and discard the upper hood opener bolt,
and install the ground bolt supplied with the ground
terminal attached.
VEHICLE
PANEL
HOOD
OPENER
ENGINE
STARTER
HARNESS
CLIP
VEHICLE
CONNECTOR
HOOD
OPENER
ENGINE
STARTER
HARNESS
VEHICLE
BOLT
(Discard.)
GROUND
BOLT
GROUND TERMINAL
13 of 23
6D18260Y
6D18270Y