Advertisement
30. Disconnect the vehicle 8-pin connector and plug it
into the engine starter harness 8-pin connector. Plug
the remaining engine starter harness 8-pin
connector into the wiper switch.
BODY
SWITCH
2 8-PIN CONNECTORS
31. Secure the engine starter harness to the vehicle
harness using two wire ties. Do not secure to the
SRS harness.
VEHICLE
HARNESS
2 WIRE TIES
10 of 23
VEHICLE 8-PIN
CONNECTOR
ENGINE STARTER
HARNESS
6D18151Y
ENGINE
STARTER
HARNESS
6D1816BY
AII 38576-38846 (0802)
32. Secure the engine starter harness to the vehicle
harness with two wire ties in the areas shown.
VEHICLE
HARNESS
VEHICLE
CLIPS
33. Disconnect the vehicle 20-pin connector from the
TPMS control unit (removed in step 24) and plug it
into the engine starter harness 20-pin connector.
Plug the remaining engine starter harness 20-pin
connector into the TPMS control unit.
VEHICLE 20-PIN
CONNECTOR
20-PIN
CONNECTOR
© 2008 American Honda Motor Co., Inc. – All Rights Reserved.
VEHICLE
WIRE TIE
HARNESS ENGINE
STARTER
WIRE
HARNESS
TIES
Inside.
ENGINE
STARTER
HARNESS
6D1817BY
TPMS CONTROL
UNIT
ENGINE STARTER
HARNESS
20-PIN
CONNECTOR
VEHICLE 20-PIN
CONNECTOR
6D1818AY
Advertisement
