Ricoh MP 2001 Operating Instructions Manual page 83

Timer Settings
Sleep Mode
After a specified period has passed, following job completion, the machine automatically turns off,
in order to conserve energy. This function is called "Auto Off".
The machine status after the Auto Off operation is referred to as "Sleep mode". For the Sleep Mode
timer, specify the time to elapse before Auto Off.
• Default: 1 min.
• The time can be set from 1 to 240 minutes, using the number keys.
• From " Sleep mode", the machine is ready to use within 10 seconds.
• Auto Off may not work when error messages appear.
Energy Saver
Set the amount of time the machine waits before switching the panel off after a job is finished.
• Default: 1 min.
• The time can be set from 1 to 240 minutes, using the number keys.
• Energy Saver may not work when error messages appear.
System Auto Reset Timer
The System Reset setting automatically switches the screen to the copier display when no
operations are in progress, or when an interrupted job is cleared. This setting determines the system
reset interval.
• Default: On, 60 sec.
• The time can be set from 10 to 999 seconds in 1 second increments, using the number keys.
• When the set time has passed, the control panel returns to the menu that was displayed before
the [User Tools/Counter] key was pressed.
Copier Auto Reset Timer
Specify the time to elapse before copier modes reset.
• If [Off] is selected, the machine does not automatically switch to the user code entry screen.
• Default: On, 60 sec.
• The time can be set from 10 to 999 seconds, using the number keys.
Settings You Can Change with User Tools
81