Ricoh MP 2001 Operating Instructions Manual page 52

3. Copying
2. Insert the paper with the side you want to copy facing down, and then adjust the paper
guide with the paper size.
4 4
1. Horizontal size
2. Vertical size
3. Extender
4. Paper guides
The bypass tray is selected on the display.
• If the guides are not flush against the copy paper, images might be skewed or paper misfeeds
might occur.
• Load only as much paper as can be held between the guides on the bypass tray.
Overloading the bypass tray can result in misfeeds and skewed images.
• Pull the extender out to support paper sizes larger than A4 , 8
• Fan paper to get air between the sheets and avoid a multi-sheet feed.
• If [Byp.] is not selected on the display, select [Byp.] using the [ ] or [ ] key, and then press
the [ ] key.
3. Press the [ ] key, and then select the paper size and type.
When copying onto regular size paper
1. Select [Paper Size] using the [ ] or [ ] key, and then press the [OK] key.
50
1 1
2 2
3 3
CUA109
1
/ " × 11" .
2