Honda 08E91-E22-101A Installation Instructions Manual page 13

49. Align the branch section of the engine starter
harness to the branch section of the vehicle harness
and secure the engine starter harness to the vehicle
harness with two wire ties.
VEHICLE
CLIP
VEHICLE
HARNESS
ENGINE
STARTER
HARNESS
BRANCH
VEHICLE
SECTION
HARNESS
Align.
© 2010 American Honda Motor Co., Inc. – All Rights Reserved.
DRIVER'S
WIRE
DASHBOARD SIDE
TIE
PANEL OPENING
ENGINE
STARTER
HARNESS
Installing the Antenna
50. Using two pairs of needle nose pliers, bend the
antenna plate according to the full scale drawing as
shown.
ANTENNA
ANTENNA
PLATE
021218CY
AII 43923 (1009)
2 NEEDLE NOSE
PLIERS
SCALE
ANTENNA
PLATE
ANTENNA
9 mm
(0.3 in.)
16 mm
(0.6 in.)
021501BY
13 of 22