Honda 08E91-E22-101A Installation Instructions Manual page 12

45. Secure the engine starter harness.
Without Ambient Light: Secure the wire tie to the
dashboard.
ENGINE STARTER
HARNESS
WIRE TIE
With Ambient Light: Secure the wire tie to the
ambient light harness.
ENGINE STARTER
HARNESS
AMBIENT LIGHT
12 of 22
DASHBOARD
WIRE TIE
AMBIENT LIGHT
HARNESS
46. Using isopropyl alcohol on a shop towel, thoroughly
clean the left knee bolster where the aluminum tape
will attach. Attach the engine starter harness to the
inside of the left knee bolster with the aluminum
tape.
LEFT KNEE
BOLSTER
ALUMINUM
021214BY
TAPE
47. Continue routing the engine starter harness as
shown.
VEHICLE 12-PIN
CONNECTOR
021215BY
ENGINE STARTER
HARNESS
48. Unplug the vehicle 12-pin connector from the select
lever, and plug it into the engine starter harness
12-pin connector. Plug the remaining engine starter
harness 12-pin connector into the select lever.
AII 43923 (1009)
ALUMINUM
TAPE
ENGINE
STARTER
HARNESS
LEFT KNEE
ENGINE
BOLSTER
STARTER
Clean with an
HARNESS
isopropyl alcohol.
SELECT LEVER
DRIVER'S DASHBOARD
SIDE PANEL OPENING
© 2010 American Honda Motor Co., Inc. – All Rights Reserved.
021216BY
ENGINE
STARTER
HARNESS
12-PIN
CONNECTOR
021217CY