ResMed H5i User Manual page 10

Cleanable water tub
Standard water tub
Operating temperature
Operating humidity
Storage and transport temperature
Storage and transport humidity
ClimateLine air tubing
MAX
ClimateLine
Heated tubing temperature cut-out
IEC 60601-1 classification
Electromagnetic compatibility
Notes:
•
The manufacturer reserves the right to change these specifications without notice.
•
The temperature and relative humidity settings displayed for ClimateLine or ClimateLine
measured values.
•
Check with your clinician/service provider before using the SlimLine air tubing with devices other
than the S9 or H5i.
Humidifier performance
The following settings have been tested at 22°C ambient temperature:
CPAP mask
pressure, cm H
4
10
20
25
a. AH - Absolute Humidity in mg/L.
b. BTPS - Body Temperature Pressure Saturated.
6
English
air tubing
RH output %
O
Setting 3
2
90
95
95
100
Injection molded plastic, stainless steel and silicone seal
Injection molded plastic, aluminium and thermoplastic
elastomer
+5ºC to +35ºC
10–95% non-condensing
-20ºC to +60ºC
10–95% non-condensing
Flexible plastic and electrical components, 2 m, 15 mm
inner diameter
Flexible plastic and electrical components,1.9 m, 19 mm
inner diameter
 41°C
Class II (double insulation), Type BF
Please refer to the S9 Information Guide for details
Nominal system output AH
Setting 6
100
100
100
100
Setting 3 Setting 6
10
11.5
11
12
MAX
are not
a b
, BTPS
18
21
18
13.5