Baracoda BRR-L Programming Manual page 8

Nextel RoadRunners Scanner Programming Guide
Set Timestamp
\ V T \ V T \ F N C 4 t \ N U L \ N U L \ L F \ L F
Note: The timestamp must comply with the following specific format:
{YY} {MM} {DD} {HH} {MM} {SS}
Setting the timestamp is accomplished by scanning the 0-9 labels (see Appendix 2), in accordance with the
timestamp format shown above.
4
Programming procedure for "Set Timestamp" option
Read "Set Suffix (prefix)" label
Read intermediary label
Corresponding to the next character to set
for the suffix (appendix 2 of this document)
NO
Read "END of config" label
Set Ti m es t am p
© Baracoda 2005
START
Finished *?
YES
END
"END of Config"
END of Conf i g
\ L F \ L F E N D \ F F \ F F
Last updated: 10/14/05