Set Min Or Max Length Option - Baracoda BRR-L Programming Manual

Nextel RoadRunners Scanner Programming Guide

3.13 Set Min or Max Length Option

The procedure to be followed for each barcode is shown below:
START
Read "Start - Set min (Max) length" label
Read intermediary label from the table below
to select the desired symbology to configure
Read intermediary label
Corresponding to the next digit of the min (Max) length
value to apply (as on a calculator).
NO
Finished?
YES
Read "END of config" label
END
Programming procedure for "set min (Max) length" option.
© Baracoda 2005
22 Last updated: 10/14/05