Table of Contents
Advertisement
Setup
Audio
DRC (Dynamic Range Compression)
This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
• You can select either Full, 6/8, 4/8, 2/8, off.
AUDIO SYNC
Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video
• You can set the audio delay time between 0 mSec
and 300 mSec. Set it to the optimal status.
Speaker Selection
The audio signals transmitted over the HDMI Cable
can be changed Home Theater/TV Speaker.
• Home Theater : Video is transmitted over the
HDMI connection cable only, and
audio is output through the
product speakers only.
• TV Speaker : Both video and audio signals are
transmitted over the HDMI
connection cable, and audio is
output through your TV speakers
only.
✎
NOTE
`
The default setting of this function is Home
Theater .
`
When TV Selection is set to TV Speaker, DSP
EQ/P.BASS/GIGA/S.VOL doesn't work.
`
With Speaker Selection set to 'TV Speaker', the
volume can be adjusted only using the TV remote
control.
User EQ
You can configure the equalizer settings manually to
your preference.
24
English
Settings
User EQ
dB
6
·
·
·
·
·
·
·
·
·
·
·
·
-6
250Hz
600Hz
1kHz
a Reset > Adjust < Move ' Return
Karaoke Scoring
Karaoke score display can be toggled On or Off.
• Off : Turns off the karaoke score display.
• On : After the singing, the score is displayed on
the screen.
✎
NOTE
`
In D.IN/USB/DIVX/MP3/WMA state,karaoke
scoring does not work.
Audio Return Ch.
You can enjoy TV sound from the Home Cinema
speakers by using just one HDMI cable.
• Off : Turn the Audio Return Channel function off.
• Auto : Listen to TV sound from the Home Cinema
speakers if your TV is compatible with the Audio
Return Channel function.
✎
NOTE
`
When Anynet+ (HDMI-CEC) is Off, the Audio
Return Channel function is not available.
`
Using an ARC (Audio Return Channel)-
uncertified HDMI cable may cause a problem in
compatibility.
`
ARC function is only available if an ARC-
compliant TV is connected.
System
Initial Settings
By using the Initial Settings, you can set the language
and TV aspect .
✎
NOTE
`
If an HDMI cable is connected to the product,
the TV aspect does not appear and it is set to
16:9 Wide automatically.
3kHz
6kHz
10kHz 15kHz
mMove " Select ' Return
Advertisement
Table of Contents
