Connecting Microphone - Samsung HT-ES420K User Manual

Hide thumbs

Table Of Contents

Table of Contents

HDMI FUNCTION

HDMI Auto Detection Function

• HDMI is an interface that enables the digital transmission of video and audio data with just a single

connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture

on a TV having an HDMI input jack.

• HDMI connection description

- HDMI outputs only a pure digital signal to the TV.

- If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on

the screen.

• What is the HDCP?

• HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via

HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a

display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized

copies from being made.

Using Anynet+(HDMI-CEC)

Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote

control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable. This is

only available with SAMSUNG TV's that support Anynet+.

1. Connect the product to a Samsung TV with an HDMI cable. (See page 18)

2. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)

✎

NOTE

The Anynet+ function supports some buttons of the remote control.

This function is not available if an HDMI cable does not support CEC.

Depending on your TV, certain HDMI output resolutions may not work.

Please refer to the user's manual of your TV.

Please check the

You can enjoy the feeling of a karaoke bar in the comfort of your home.

Watch the video and sing along the lyrics displayed on the TV screen against the accompaniment.

1. Connect the microphone to the MIC jack on the front of the product.You can connect up to two microphones.

2. Press the MIC VOL button to adjust the volume of the microphone.

3. Press the ECHO button to adjust the echo level of the microphone.

4. During the playback, press the KEYCON button,then press the (#/b) button.

Each time the (#) button is pressed, the key is increased,

and each time the (b) button is pressed, the key is decreased.

5. Press the MY KARAOKE button to suppress the Vocal.Each time the button is

pressed, the selection is changed as follows: Maximum Reduction ➞ Minimum

reduction ➞ Original vocals.

✎

NOTE

If you hear strange noises (squealing or howling) while using the Karaoke

feature, move the microphone away from the speakers. Turning down the

microphone's volume or the speaker volume is also effective.

The microphone does not operate in the AUX and TUNER mode.

When Speaker Selection is set to TV Speaker, The Microphone is not

available.

After setting my karaoke or the keycon,S.VOL/P.BASS/DSP(EQ)/GIGA does

not work.

MY KARAOKE function doesn't work in D.IN/DIVX state, KEYCON function

doesn't work in D.IN/DIVX/USB/MP3/WMA state.

After the stop operation,the setting of my karaoke and keycon will disappear.

logo (If your TV has an