Joie chrome Instruction Manual page 10

Adjust Handle
The handle has 3 positions.
To adjust the height of the handle, pull the handle upward or downward
- 1
adjustment button. 30
Fold Stroller
!
Please fold the hood before folding the stroller.
Press the recline handle on the back of backrest to rotate the backrest to horizontal position.
Lift the folding button , step the folding pedal downwards , push the stroller forward to fold
The storage latch will automatically hook onto the storage mount, then the stroller is folded and locked
32
completely.
Use Accessories
Accessories may be sold separately or may not be available depending on region.
Use with Joie Child Restraint
When using with Joie child restraint gemm, please refer to the following instructions.
1. To attach adapter, place adapter onto mounts as show
completely.
34
2. To attach child restraint, place child restraint onto adapter as show
restraint is locked completely.
36
3. To remove child restraint, lift the child restraint upwards
- 2
buttons A. 37
!
If you have any problems about using the stroller and the adapter, please refer to their own instruction manuals.
!
To remove adapter, lift the adapter upwards
38
!
Remove the adapter show as
39
!
Please don't fold stroller when attaching the child restraint.
Use Carry Cot
Carry Cot Assembly
1. Open the wire support on both side of the carry cot
"Click" sound means the wire support is secure.
Place the mattress into the carry cot, 41 and smooth it down.
!
Always use the mattress when using the carry cot.
!
Mattress cover can easily be removed to wash.
2. Adjust carry cot hood
Open the hood and pull the front end to secure.
Close the hood by pressing the folding buttons on either side.
3. Assembly carry cot apron
Place the apron over the carry cot, then attach the 5 pairs of hook and loop fasteners.
Carry cot assembled completely as
43
Attach Carry Cot onto Chassis
Align the sides of the carry cot with the adapters on the frame.
Place the carry cot directly down until it clicks into place.
A click sound means carry cot assembled completely.
17
- 2
30 while pressing the handle
31
31
.
33 , A "click" sound means the adapter is locked
35
, A "click" sound means the child
37
- 1 while pressing the two stroller fix release
-2 - 1
while pressing the two release buttons.
38
40 , Then click the wire into the four plastic parts, A
- 1
40
- 1
41
42
- 1
42
- 1
43
44
45
!
Always remove the adapters before using the carry cot.
!
Please don't fold stroller when attaching the carry cot.
Remove Carry Cot
Press release buttons on both side of carry cot
Use Footmuff Apron
The soft footmuff apron can provide your child with a warm and comfortable sleeping environment.
Assemble the footmuff apron by following these steps.
1. Adjust the calf support and backrest to level position and recline position respectively before assembling
footmuff apron. 47
2. Cover the calf support with footmuff apron.
48
The assembled footmuff apron is shown as
49
Use Rain Cover
To assemble the rain cover, place it over the stroller, and then attach it on the armrest by 4 pairs of hook and
loop fasteners. 50
!
Before using the rain cover, to be make sure the seat has been fastened.
!
When using the rain cover, please always check its ventilation.
!
When not in use, please check that the rain cover has been cleaned and dried before folding.
!
Do not fold the stroller after assembling the rain cover.
!
Do not place your child into the stroller assembled with rain cover during hot weather.
! To be used under adult supervision. Do not use on a pushchair without a canopy.
Use Seat Liner
see images
51
Use Shoulder Harness Pad Cover and Crotch Harness Pad Cover
The shoulder harness pad cover or crotch harness pad cover can be removed from the webbing. Simply
reverse these steps to re-assemble shoulder harness and crotch harness pad cover.
Care and Maintenance
!
Removable seat pad may be washed in cold water and drip-dried. No bleach.
!
To clean stroller frame, use only household soap and warm water. No bleach or detergent.
!
From time to time, check your stroller for loose screws, worn parts,torn material or stitching. Replace or
repair the parts as needed.
!
Excessive exposure to sun or heat could cause fading or warping of parts.
!
If stroller becomes wet, open hood and allow to dry thoroughly before storing.
! If wheels squeak, use a light oil (e.g., Silicon Spray, antirust oil, or sewing machine oil). It is important to get
the oil into the axle and wheel assembly. 52
!
When using your stroller at the beach, completely clean your stroller after use to remove sand and salt from
mechanisms and wheel assemblies.
- 1 - 2
46 , and then lift it upwards. 46
18