VTech Kidizoom User Manual page 14

CONNECT TO A COMPUTER
FOR FILE TRANSFER
You can connect Kidizoom
using the included micro-USB cable. Once connected, you can transfer
files between the camera and computer. Please follow the below steps.
• Pull up the rubber cover of the micro-USB port on the side of your
camera.
• Insert the micro-USB cable (small end) into the micro-USB port on
the camera.
• Insert the larger end of the micro-USB cable into a USB port on the
computer. A USB port is usually marked with this symbol
• You will see a removable drive called VTech 1707, please use this
to transfer files to and from the camera. There is another removable
drive called VT SYSTEM, which is for the storage of system data
only.
Note: Once the camera is connected to your computer, do not disconnect
it whilst files are uploading or downloading. After you have finished,
safely remove Kidizoom
then physically disconnect the camera from the computer.
To avoid any potential damage to your Kidizoom
• Ensure the micro-USB rubber cover is fully covering the micro-USB
port of the camera when it is not connected to the cable.
• Ensure the microSD card slot rubber cover of the camera is fitted in
place.
To back up photo or video files taken by
Kidizoom
• Locate and open the DCIM folder in the removable drive VTech
1707.
• Your photo and video files will be placed in a subfolder. Drag and
drop the files to a location on your computer to back them up.
To transfer photo or video files to
Kidizoom
• Select the photo or video files you would like to upload from your
computer first.
• Locate and open the DOWNLOAD folder in the removable drive
VTech 1707, drag and drop the photo files into the PHOTO subfolder,
14
or VIDEO subfolder for video files.
®
Action Cam
®
Action Cam
®
Action Cam
®
Action Cam
to a PC or Mac computer
TM
from your computer. You can
TM
:
TM
:
TM
.
Action Cam
® TM