VTech Kidizoom User Manual page 12

• To remove the memory card from the slot, push the card once and it
will eject.
Note:
• It is recommended to format your memory card before using in
Kidizoom
• If a memory card is being used, data stored on the camera's internal
memory cannot be seen until the card is removed. Make sure you
back up all important data from the memory card regularly.
TO BEGIN USING
KIDIZOOM
Make sure the master power switch is in the 1 position
the camera first before using.
Note: It is not necessary to move the master power switch to off when
used daily.
Press the Home (On/Off) button
on. When turning the camera on for the first time, you
will need to set the date and time.
The left and right icons will appear on the item to be
adjusted. Press the left
the value, then press the OK button
the left
other items, or move to the OK icon and press the OK
button when you have finished.
After setting the date, the time setting screen will appear.
Set the time in the same fashion as before. When you
have finished, move to the OK icon and press the OK
button to confirm.
Note: If the battery level is too low and cannot keep the
clock running, you will need to enter the time and date
again after recharging.
12
Action Cam
®
ACTION CAM
®
or right buttons again to move to adjust the
.
TM
to turn the camera
or right buttons to change
to confirm. Press
TM
and charge