Table of Contents
Advertisement
STORAGE
Preparing for use after storage
18.2
–
Cover the motorcycle with a tarp or cover that is permeable to air.
Info
Do not use non-porous materials since they prevent humidity from escaping,
thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm
up properly, the water vapor produced during combustion condenses and causes
valves and exhaust system to rust.
–
Take the motorcycle off of the front wheel stand. (
–
Take the motorcycle off of the rear wheel stand. (
–
Recharge the battery.
–
Install the battery.
–
Set the clock. (
–
Refuel. (
–
Perform checks and vehicle care when preparing for use. (
–
Take a test ride.
401059-01
x
(
p. 99)
x
(
p. 99)
p. 28)
p. 49)
p. 61)
p. 62)
p. 41)
135
Advertisement
Table of Contents
