Table of Contents
Advertisement
CLEANING, CARE
Warning
Danger of accidents Reduced braking efficiency due to wet or dirty brakes.
–
Clean or dry dirty or wet brakes by riding and braking gently.
–
After cleaning, ride the vehicle a short distance until the engine is warm, applying the
brakes occasionally.
Info
The heat produced causes water at inaccessible locations in the engine and the
brakes to evaporate.
–
Push back the protection covers of the handlebar controls to allow any water that has
penetrated to evaporate.
–
After the motorcycle has cooled off, lubricate all moving parts and bearings.
–
Clean the chain. (
p. 66)
–
Treat bare metal parts (except for brake discs and exhaust system) with anti-corrosion
materials.
Cleaning and preserving materials for metal, rubber and plastic (
–
Treat all painted parts with a mild paint polish.
High-luster polish for paint (
–
Treat all plastic parts and powder-coated parts with a mild cleaning and care agent.
Paint cleaner and polish for high-gloss and matte finishes, bare metal and plastic
surfaces (
p. 163)
–
Oil the ignition/steering lock.
Universal oil spray (
p. 163)
p. 162)
132
p. 162)
Advertisement
Table of Contents
