Using The Car Handsfree - Sony Ericsson HCB-30 Instruction Manual

4. Press and hold
you hear a long high tone and the indicator lights on
the control panel flash green and red.
5. Continue according to the instructions in the phone's
user documentation. The car handsfree passkey
is 0000.
Resetting the car handsfree
You may want to reset the car handsfree to its default
settings. This also clears all current pairings.
To reset the car handsfree
1. Turn on the car handsfree.
2. If the indicator light is green or red, the car handsfree
is connected to a Bluetooth device. To disconnect
the devices, press
The indicator light is turned off.
3. Press and
a long high tone.
4. Press and
a long low tone.
The car handsfree has now been reset and all current
pairings in your car handsfree have been cleared.
8

Using the car handsfree

and at the same time until
until you hear a tone.
at the same time until you hear
at the same time until you hear
Using the car handsfree
Once you have paired the car handsfree with your
phone, you can make and receive calls using the
control panel of the car handsfree, as long as it is
turned on and within range of the phone, with no solid
objects in between.
The following instructions cover the use of the car
handsfree with a Sony Ericsson or Ericsson phone with
built-in Bluetooth capability, or with a Bluetooth phone
adapter from Sony Ericsson or Ericsson. If you have
another make of mobile phone, please refer to the
phone's user documentation.
Note: Always make sure the Bluetooth operation mode
in the phone is on when using a Bluetooth car handsfree.
Making calls
Phone functionality is still available when the car
handsfree is connected. You can make a call using
the phone keys or using the control panel of the car
handsfree. To make a call using the control panel,
you use the voice dialling function.