Using Headset And Car Handsfree - Sony Ericsson HCB-30 Instruction Manual

To transfer the sound to the phone
• During a call, scroll to Ongoing call,
sound, , (To phone,
YES
when the sound has been transferred.
• Or, with some phones, press
until you hear a tone.

Using headset and car handsfree

When you enter the car after using the Bluetooth
headset, the car handsfree and phone usually connect
automatically the moment you turn the ignition key to
on. The phone connects to the device which is first in
the list of paired devices. If the indicator lights of the
car handsfree are off, move the car handsfree to first
position of the list of paired devices in your phone.
To move the car handsfree to first position
1. Scroll to Extras or Connect,
Paired devices, .
YES
2. Select the car handsfree,
With some phones, you can also select Connect,
You then connect to the car handsfree without
changing the order of the devices in the list of paired
devices.
, Transfer
YES
). You hear a short high tone
YES
on the car handsfree
, Bluetooth,
YES YES
, Set as first, .
YES YES
Note: If you have an ongoing call in your Bluetooth
headset, and enter the car and wish to continue your
conversation in the car handsfree, you must transfer
the sound to the car handsfree. See "To transfer the
sound to the car handsfree" on page 10.
Switching between phones
You can pair the Bluetooth car handsfree with up to
five mobile phones, but you can only use one phone at
a time with the car handsfree. If you want to use one
of the other phones that you have paired with your car
handsfree, you need to enter pairing mode and select
the car handsfree again.
To switch between phones
1. If the indicator light is green or red, the car handsfree
is connected to a Bluetooth device. To disconnect
the devices, press
,
The indicator light is turned off.
2. Press and hold
. you hear a long high tone and the indicator lights on
YES
the control panel flash green and red.
until you hear a tone.
and at the same time until
Using the car handsfree 11