Specifications And Requirements; Specifications - Yamaha 115C Owner's Manual

EMU31480

Specifications

TIP:
"(AL)" stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, "(SUS)" represents the value for
stainless steel propeller installed and "(PL)"
for plastic propeller installed.
EMU2821J
Dimension:
Overall length:
808 mm (31.8 in)
Overall width:
582 mm (22.9 in)
Overall height L:
1472 mm (58.0 in)
Overall height X:
1599 mm (63.0 in)
Transom height L:
516 mm (20.3 in)
Transom height X:
642 mm (25.3 in)
Weight (AL) L:
165.0 kg (364 lb)
Weight (AL) X:
169.0 kg (373 lb)
Weight (SUS) L:
167.0 kg (368 lb)
Weight (SUS) X:
171.0 kg (377 lb)
Performance:
Full throttle operating range:
115CETO 4500–5500 r/min
130BETO 5000–6000 r/min
Maximum output:
115CETO 84.6 kW@5000 r/min
(115 HP@5000 r/min)
130BETO 95.6 kW@5500 r/min
(130 HP@5500 r/min)

Specifications and requirements

Engine:
Drive unit:
Fuel and oil:
Idle speed (in neutral):
750 ±50 r/min
Type:
2-stroke V
Displacement:
3
1730.0 cm
Bore × stroke:
90.0 × 68.0 mm (3.54 × 2.68 in)
Ignition system:
CDI
Spark plug (NGK):
115CETO BR8HS-10
130BETO BR9HS-10
Spark plug gap:
0.9–1.0 mm (0.035–0.039 in)
Control system:
Remote control
Starting system:
Electric starter
Starting carburetion system:
Choke valve
Min. cold cranking amps (CCA/EN):
430.0 A
Min. rated capacity (20HR/IEC):
70.0 Ah
Maximum generator output:
20 A
Gear positions:
Forward-neutral-reverse
Gear ratio:
2.00 (26/13)
Trim and tilt system:
Power trim and tilt
Propeller mark:
K
Recommended fuel:
Regular unleaded gasoline
Recommended engine oil:
9