Download Print this page

Descaling; Installation Instruction - Nespresso ZENIUS User Manual

Hide thumbs Also See for ZENIUS:

Advertisement

Safety precautions
EN
6
Read these instructions carefully before using
your new coffee machine for the first time. Im-
proper use of the machine releases Nespresso
from any liability.
Caution – When you see this sign, please refer
to the safety precautions to avoid possible harm
and damage.
Information – When you see this sign, please
take note of the advice for the correct and safe usa-
ge of your coffee machine.
1 In case of an emergency: immediately remove the
plug from the power socket.
2 Only plug the appliance into suitable and easily
accessible, earthed mains connections.
3 The use of incorrect connection voids the war-
ranty.
4 Children should never use the appliance without
close adult supervision.
5 This appliance is not intended for use by persons
(including children) with reduced physical, sen-
sory or mental capabilities or lack of experience
and knowledge unless they have been given ini-
tial supervision or instruction concerning the use
of the appliance by a person responsible for their
safety.
6 Check that the voltage quoted on the rating plate
is the same as your mains voltage.
7 Use only the specific power cord delivered with the
machine, mount it in the bottom of the machine as
mentioned in the user manual.
8 Your machine is made for indoor use only.
9 Do not put the fingers under the coffee or hot wa-
ter outlets, risk of scalding.
10 Always fill the water tank with potable water.
11 Empty water tank if coffee machine will not be
used for an extended time (holidays etc.).
12 Replace water in water tank before coffee ma-
chine is put into operation after a weekend or a
similar period of time.
13 Always close the lever completely and never lift
it during operation. Scalding may occur. Do not
put fingers into the capsule insertion slot or the
capsule ejection. Danger of injury!
14 If a capsule is blocked into the capsule compart-
ment, turn the machine off and unplug it before
any operation. Call Nespresso Business Solutions.
15 To avoid hazardous damage, never place the ap-
pliance on or beside hot surfaces such as heating
plate, radiators, stoves, ovens, gas burners, open
flames, or similar. Always place it on a flat, stable
and even surface, away from water splashes. The
surface must be resistant to heat and fluids, like
water, coffee, descaler, or similar.
16 Place this product 20cm from the body of the user
or nearby person.
17 Remove the plug from the mains socket if you will
not be using the machine for an extended time
(holidays). Before cleaning and servicing, remove
the plug from the mains socket and let the ma-
chine cool down. Do not unplug by pulling the
power cord.
18 Do not use the machine if it is not operating per-
fectly or if it shows any sign of damage. In case
of any malfunction or damage, call your nearest
Nespresso Business Solutions.
19 All operations other than normal use, cleaning,
and servicing must be performed by the Nespresso
authorized after-sales centre.
The warranty does not apply to any defect result-
ing from accident, negligence, misuse, failure to
follow the product instructions, calcium deposits,
improper or inadequate maintenance, normal
wear and tear, use on current or voltage other
than as marked on the product, product altera-
tion, fire, lightening, flood or external causes.
20 Never immerse the machine, power cord or plug
in water or any other liquid.
21 Keep the power cord out of reach of children.
22 Never leave the power cord near or in contact
with hot parts of the machine, a source of heat,
or a sharp edge.
23 When the power cord or plug is damaged, you
must not use the machine. In order to avoid dan-
ger, call your Nespresso Business Solutions to have
the defective part repaired or replaced.
24 For your own safety, you should use only parts
and accessories from Nespresso that are made for
your machine.
25 Never use the machine without the drip tray or
the drip grid.
26 All Nespresso machines must pass stringent con-
trols. Reliability tests under practical conditions are
performed randomly on selected units. This can
show traces of any previous use.
27 The manufacturer cannot be held liable for any
damage caused by not intended use or inappro-
priate handling of the machine.

28 Descaling:

• The descaling solution can be harmful. Avoid
contact with eyes, skin and surfaces. We recom-
mend the Nespresso descaling kit available from
Nespresso as it is specifically adapted to your ma-
chine. Do not use other products (such as vinegar)
that would affect the taste of the coffee. For any
additional questions you may have regarding des-
caling, please contact your Nespresso representa-
tive.
• Preparation: please read carefully the safety in-
structions on the descaling agent packaging and
follow the instructions from the descaling manual.
• Descaling: do not use the machine for any other
purpose during the descaling process.
• Rinse: rinse the water tank and clean the machine
to avoid any residual descaling solution.
Household use
This appliance is intended to be used in household
and similar applications such as:
• staff kitchen areas in shops, offices and other work-
ing environments;
• farm houses;
• by clients in hotels, motels and other residential
type environments;
• bed and breakfast type environments.
This product has not been certified for use on pla-
nes, boats, trains and automobiles.
Office use
Zenius is an Espresso coffee maker (or machine).
This appliance is intended to be used by expert
or trained users in shops, in light industry and on
farms, or for office use by lay persons.

Installation instruction

• Machine must be disconnected during installa-
tion.
• minimal space (height) for correct use of the ma-
chine: 55 cm.
• in a horizontal position
This machine works only with Nespresso
®
Pro capsu-
les, available through Nespresso and its authorised
distributors.
SAVE THESE INSTRUCTIONS
Pass them on to any subsequent user.
This instruction manual is also available as a PDF at
www.nespresso.com/pro.

Advertisement

loading

This manual is also suitable for:

Zn100 pro