Installation Instructions - Fisher & Paykel DE62T27D Installation Instructions And User Manual

Installation instructions

7
Read the important safety instructions on pages 3 – 6 before you start installing the dryer
EN
Check to make sure you have all the tools and parts necessary to correctly install this appliance.
Tools required
¼'' nut driver or socket wrench
Phillips screwdriver
Flat-blade screwdriver
Adjustable wrench 8" or 10" (200 mm or 250 mm) for gas connections
Pipe joint compound (pipe dope or tape) for gas pipe connections that is resistant to
LP Propane, Butane and Natural Gas (Gas models only)
Level
Caulking gun and compound (for installing new exhaust vent)
Gloves
Safety glasses
Knife
Duct tape
Parts supplied
Fig.2 Power supply cord
2 feet inserts for front feet.
A power supply cord is supplied already connected to the gas dryer (Gas models only)
Check to make sure all parts have been supplied.
Accessories
Mobile Home Installation Kit Part No 395488
Natural Gas to LP Conversion Kit Part No 395489 (Gas models only)
LP to Natural Gas Conversion Kit Part No 395490 (Gas models only)
Kit Element 208V Part No 395500 (Electric models only)
Parts needed
If you need to purchase a power supply cord kit or power supply cable, they must meet the
requirements outlined on page 21 (power supply). Check with local codes and read electrical, gas
and venting requirements before purchasing parts.