iseg HPS Series User Manual

1. Safety instructions
2. Description of operation
3. Technical Data
4. Description of CAN Interface
5. Description of RS232 Interface
6. Description of IEEE Interface
7. Command sets for RS232 and IEEE Interface
8. Description of analogue I/O
9. Trouble shooting
! Attention!
It is forbidden to use the unit if the covers have been removed to avoid the possibility of lethal
shock to the operator!
We decline all responsibility for damages and injuries caused by an improper use of the
module. It is strongly recommended to read the operators manual before operation!
Note:
All information in this document is subject to change without notice. We take no responsibility for any error in
this document. We reserve the right to make changes in the product design without any notification to the users.
Filename HPx_300-800W_03_eng.___; Version 4.04 as of 2006-11-08
iseg Spezialelektronik GmbH
Bautzner Landstr. 23
D - 01454 Radeberg/ Rossendorf
19" / 1U – High Voltage Power Supplies
HPS-series 300 W and 800 W
Email: sales@iseg-hv.de
http://www.iseg-hv.de
Manual
S p e z i a l e l e k t r o n i k G m b H
Tel ++ 49 (0)351 / 26 996 - 0
Fax ++ 49 (0)351 / 26 996 - 21