Stick Welding; Dc Lift Tig Welding - Thermal Arc pro-life 250s Operating Manual

PRO-LITE 250S

6.01 Stick Welding

Connect work lead to negative terminal
Connect electrode lead to positive terminal
Switch machine on
Connect remote control device if required
Use the Scroll Buttons to move to the parameter to be set. The LED will show which
function is being adjusted on the weld sequence graph. Use the control knob to adjust each
parameter.
Set HOT START
Set WELD current
Set Arc Control
Commence welding

6.02 DC LIFT TIG Welding

Connect work lead to positive terminal
Connect TIG torch to negative terminal
Switch machine on
Set weld current.
Connect remote control device. A remote control device is required for use during LIFT
TIG operation. See section 4.01, section 2 "Remote Control Socket", for complete details
of the remote device.
Use the Scroll Buttons to move to the parameter to be set. The LED will show which
function is being adjusted on the weld sequence graph. Use the control knob to adjust each
parameter.
Set WELD current
Commence welding
June 29, 2005 36