Table of Contents
Advertisement
Loading instructions for MIS injector mobile unit E-450
^ Fit the trocar or instrument sleeves
< 10 mm Ø into sleeve E-336 or on to
jet E-453. Trocar sleeves with a side
connection should be attached via
the E-448 tube with Luer lock adapt-
ers.
^ Connect narrow (Veress) cannulae so
that they lie at an angle with Luer lock
adapters E-449, or fix on the jet with
a spring clip.
Optics insert (not illustrated)
^ Only optics which are safeguarded
by the manufacturer against mechan-
ical damage may be processed in
special inserts such as the
E-460 or corresponding optic manu-
facturer's inserts.
^ Assurance is needed from the manu-
facturer that optics and fibre optic
(cold-light) cables can be thermally
treated. Pre-treatment conditions
must be observed. DISIN VARIO
93°C-10 MIN or DISIN 93°C-10 MIN
process with de-ionised water final
rinse.
If you have any questions relating to
applications technology:
please contact our professional advi-
sory team at Miele.
29
Hide quick links:
Advertisement
Table of Contents
