Position The Salt Container As Follows - Miele G 7782 Operating Instructions Manual

Position the salt container as
follows:
1. Remove the lower basket from the
machine.
2. Unscrew the plastic cap in the base
of the wash cabinet.
3. Place the salt container on the reacti-
vation socket and screw firmly into
place.
Reactivating the water softener
4. Close the door.
5. Turn on the washer/disinfector.
6. Press the REACTIVATION touch pad.
7. Press the START touch pad. The re-
activation program proceeds auto-
matically.
8. When the REACTIVATION light at the
left hand side of the control panel
and the START indicator light have
gone out, turn off the washer /
disinfector.
9. Remove salt container slowly, allow-
ing pressure to be released. Do not
open by force, If you cannot unscrew
it by hand, contact the Miele Techni-
cal Service Department.
10. Screw the plastic lid back on the
socket.
11. Reposition the lower basket.
12. Rinse the salt container and filter
insert thoroughly.
IMPORTANT
If, after REACTIVATION cycle, salt is still
found in the salt container, water pres-
sure may be fluctuating or is below 35
psi (2.5 bar). If this is the case, run the
REACTIVATION cycle again to wash all
water softener from the salt container.
43