Table of Contents
Advertisement
Loading instructions for MIS injector mobile unit E-450
Opening spring E-456
^ For MIS instruments which are
sprung to stay closed and cannot be
taken apart, scissors, forceps etc.,
and must be held open in the wash
jet sleeve. Use the opening spring if
appropriate.
28
^ Take apart trocar sleeves and push
on to the corresponding injector jets.
E-454 A for Trocar sleeves
10-15 mm Ø
E-464 B with E-454 A for Trocar
sleeves >15 mm Ø.
Using the clamp springs, the sleeves
or the flap valve can be positioned in
such a way that critical areas such as
for example the side piston shoe, can
be washed by the jet openings on the
side or the jet spray of the
E-454.
^ Important:
To maintain wash pressure every o-
pening must be fitted either with an
item to be cleaned or a blanking
screw C.
1
1
2
3
Hide quick links:
Advertisement
Table of Contents
