Miele G 7782 Operating Instructions Manual page 18

Adjusting the water softener
1. Using table provided, identify correct
"Display Field" number that corre-
sponds to your local water hardness.
2. Press the DRAIN and DRYING touch
pads simultaneously and, while de-
pressed, turn the machine on, using
the main ON/OFF switch.
"P3" will appear in the display field.
3. Press the REACTIVATION touch pad.
The "P3" will disappear and setting
"0" will appear in the display field.
4. Press the DRYING touch pad as
many times as necessary for the de-
sired value to appear in the display
field.
5. Press the START touch pad.
"SP" appears in the display field.
6. Press START once more. The setting
will now be stored. The display field
clears.
7. The washer/disinfector is now ready
for operation.
18
If the water hardness in your area is
permanently below 107 ppm CaCO3,
you do not need to soften the water.
Please deactivate the water softener by
selecting the setting "0" in the display
field according to above instructions.
The REACTIVATION indicator light will
not come on and the water softener will
not need to be reactivated.
For instructions on reactivating the
water softener, see "Reactivating the
water softener".