Table of Contents
Advertisement
Setting Item
Default Value
Direct Change
On
Auto Reconnect
On
Wakeup via
Off
Bluetooth
46
Setting Details
The input of the unit will automatically be
switched to "BLUETOOTH" when connection is
made from a Bluetooth-enabled device to the
unit.
"On": The input will automatically become
"BLUETOOTH" when a Bluetooth-enabled device
is connected.
"Off": The function is disabled.
r If the input is not switched automatically, set to
"Off" and change the input manually.
This function automatically reconnects to the
Bluetooth-enabled device connected last when
you change the input selector to "BLUETOOTH".
"On": Use this function
"Off": Do not use this function
r This function may not work depending on your
Bluetooth-enabled device.
This function wakes up the unit on standby by
connecting a Bluetooth-enabled device.
"On": Use this function
"Off": Do not use this function
r Setting to "On" increases the power
consumption even when the unit is on standby.
However, the increase in power consumption
is kept to a minimum by automatically entering
the HYBRID STANDBY mode, where only the
essential circuit is operating.
r This setting "Wakeup via Bluetooth" is fixed to
"Off" if "Direct Change" is set to "Off".
Setting Item
Default Value
Pairing Information
–
Device
–
Status
–
r Wait for a while if "Bluetooth" cannot be selected. It will appear when the network function is started
up.
Firmware Update
Setting Item
Default Value
Update Notice
Enable
Version
–
Update via NET
–
Advanced Settings
Setting Details
When paring is performed, the information of
the previous pairing stored in this unit will be
initialized.
Pressing ENTER when "Clear" is displayed
initializes the pairing information stored in this
unit.
r This function does not initialize the pairing
information on the Bluetooth-enabled device.
When pairing the unit again with the device,
be sure to clear the pairing information on
the Bluetooth-enabled device in advance.
For information on how to clear the pairing
information, refer to the Bluetooth-enabled
device's instruction manual.
Displays the name of the Bluetooth-enabled
device connected to the unit.
r The name is not displayed when "Status" is
"Ready" and "Pairing".
Displays the status of the Bluetooth-enabled
device connected to the unit.
"Ready": Not paired
"Pairing": Paired
"Connected": Successfully connected
Setting Details
Availability of a firmware update will be notified
via network.
"Enable": Notify updates
"Disable": Do not notify updates
The current firmware version will be displayed.
Press ENTER to select when you want to update
the firmware via network.
r You will not be able to select this setting if you
do not have Internet access or there is nothing
to update.
Hide quick links:
Advertisement
Table of Contents
