Disassembly; Cabinet; Base Unit (Bu-5Bd24) - Sony MCE-K550 Service Manual

Note: Follow the disassembly procedure in the numerical order given.

4-1. CABINET

• In order to remove the front panel block when the power supply
does not turn on, rotate the cam with screwdriver as the figure
shows, and the disk table will be moved.
Then pull out the disk table by your hand to remove the loading
panel. After that take out the front panel block.

4-2. BASE UNIT (BU-5BD24)

1 Turn the cam to the
direction of arrow
(counter clock wise)
by screwdriver
SECTION 4

DISASSEMBLY

Screwdriver
Pull out disk table
BU-5BD24
2 Take off the disk table.
— 7 —
3 Yoke bracket
4 Remove the MD (BU-5BD24)
to the direction of arrow.