Time Display - Beko WM 62125W User Manual

• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water,
detergent and time.
• Quick Wash
This function can be used in Cottons and Synthetics programmes. It decreases the washing times and also the
number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your machine with half of the maximum laundry specified in the programme table.
• Rinse Plus
This function enables the machine to make another rinsing in addition to the one already made after the main
wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the minimal detergent
remnants on the laundry can be reduced.
• Rinse Hold
If you are not going to unload your clothes immediately after the programme completes, you can use rinse hold
function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when
there is no water in the machine. Press Start / Pause button after this process if you want to drain the water
without spinning your laundry. Programme will resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.
The programme resumes. Water is drained, laundry is spun and the programme is completed.
• Night mode
Use to wash the cottons with lesser energy consumption and silently. Spin steps are cancelled for a silent
washing and the cycle ends with the Rinse Hold step. After completion of the programme, run Spin cycle to
spin the laundry.

Time display

Remaining time for the completion of the programme while it is running is displayed as "01:30" in hours and
minutes format.
C
Programme time may differ from the values in the "Programme and consumption table" depending on the water pressure,
water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected and the
changes at the mains voltage.
4.3.9 End Time
With the End Time function, the startup of the programme may be delayed up to 24 hours. After pressing End
Time button, the programme's estimated ending time is displayed. If the End Time is adjusted, End Time
indicator is illuminated.
In order for the End Time function is activated and the programme is completed at the end of the specified
time, you must press Start / Pause button after adjusting the time.
If you want to cancel End Time function, press On / Off button to turn off and on the machine.
C
Do not use liquid detergents when you activate End Time function! There is the risk of staining of the clothes.
21 / EN
88
C
0
88:88
1888
88
0 C
88:88
1888
Washing Machine / User's Manual