Removing The Pad Pcb; Removing The Speaker - Panasonic CF-48 Service Manual

Figure 30
9. Remove the fout screws <J>, and remove the LCD plate L
and the LCD plate R.
Screw <J>: DXQT2+D2L
Figure 31
10. Remove the two screws <K>, and remove the tilt L and
the tilt R.
Screw <K>: DFHE5121YA

6.15. Removing the PAD PCB.

1. Remove the four screw <C>, and remove the PAD plate.
2. Remove the PAD SW FFC and PAD MAIN FFC, and re-
move the PAD PCB.
3. Peel the touch PAD.
4. Remove the PAD button.
Screw <C> : XTB2+6G

6.16. Removing the Speaker

1. Unhook the four hooks of a speaker holder and unhook the
four hooks of another speaker holder.
2. Remove the two speaker hold rubber and the speaker with
cable.
6 - 8
Figure 32
Figure 33