Panasonic CF-48 Service Manual page 29

For 4. HDD - DRIVE TEST.
Press 4 and Enter keys.
(Normal Message) : Test done ! !
When an error message is displayed, refer to [5.2 Error Message]
For 5. HDD - READ/WRITE TEST.
Press 5 and Enter keys.
Press Y key.
(Normal Message) : Test done ! !
When an error message is displayed, refer to [5.2 Error Message].
For 6. HDD - SEQUENTIAL SEEK TEST.
Press 6 and Enter keys.
The numbers indicated by xxx will vary depending on the type of HDD.
(Normal Message) : Test done ! !
When an error message is displayed, refer to [5.2 Error Message].
For 7. HDD - RANDOM SEEK TEST.
Press 7 and Enter keys.
The numbers indicated by xxx will vary depending on the type of HDD.
(Normal Message) : Test done ! !
When an error message is displayed, refer to [5.2 Error Message].
8) 1FLOPPY DISK DRIVE(S) TEST
Press 11 and Enter keys.
1st HDD - DRIVE TEST
Count value to get SEEK COMPLETE = 0
Hit any key when ready._
1st HDD - READ/WRITE TEST
xxxxxxxxxxxxxxxxxxxxxx Warning ! ! ! xxxxxxxxxxxxxxxxxxxxx
Reserved cylinder for DIAGNOSTICS will lose its data.
Reserved cylinder number = ***
xxxxxxxxxxxxxxxxxxxxxx Warning ! ! ! xxxxxxxxxxxxxxxxxxxxx
Do you want to continue ? (Y/N)
Hit any key when ready._
1st HDD - SEQUENTIAL SEEK TEST
Cylinder = xxx
Hit any key when ready._
1st HDD - RANDOM SEEK TEST
Cylinder = xxx
Hit any key when ready._
1st FLOPPY DISK DRIVE(S)
1. TEST ALL DEVICES
2. TEST AUTOMATICALLY (
3. EXIT
4. FLOPPY DISK CONTROLLER TEST
5. 1st FLOPPY DISK DRIVE TEST
SELECT : _
5 - 5
( DEVICES)
DEVICES)