Panasonic CF-48 Service Manual page 28

5) BATTERY PACK TEST
Press 8 and Enter keys.
(Normal message) : Test done ! ! Hit any key when ready._
When an error message is displayed, refer to [5.2 Error Massage].
6) VIDEO TEST
Press 9 and Enter keys.
Select the desired test item, and execute by the Enter key.
7) 1 HARD DISK DRIVE(S) TEST
Press 10 and Enter keys.
For 4. HARD DISK CONTROLLER TEST.
Press 4 and Enter keys
(Normal Message) : Test done ! !
When an error message is displayed, refer to [5.2 Error Message].
For 5. 1st HARD DISK DRIVE TEST.
Press 5 and Enter keys.
BATTERY PACK TEST
Battery Pack : exists.
AC Adaptor : connected (Not connected)
VIDEO
1. TEST ALL DEVICES
2. TEST AUTOMATICALLY (
3. EXIT
4. VGA COLOR MODE TEST
5. VGA MONO MODE TEST
6. S-VGA COLOR MODE TEST
SELECT MENU : _
1st HARD DISK DRIVE(S)
1. TEST ALL DEVICES
2. TEST AUTOMATICALLY (
3. EXIT
4. HARD DISK CONTROLLER TEST
5. 1st HARD DISK DRIVE TEST
SELECT : _
HARD DISK CONTROLLER TEST
Hit any key when ready._
1st HARD DISK DRIVE TEST
1. TEST ALL DEVICES
2. TEST AUTOMATICALLY (
3. EXIT
4. HDD - DRIVE TEST
5. HDD - READ/WRITE TEST
6. HDD - SEQUENTIAL SEEK TEST
7. HDD - RANDOM SEEK TEST
SELECT : _
5 - 4
( DEVICES)
DEVICES)
*Use these tests to look at the screen and
verify that the LCD screen is displaying
properly,.
( DEVICES)
DEVICES)
( DEVICES)
DEVICES)
.