Manual Setup (Basic) - Yamaha RX-V3800 Owner's Manual

Graphical user interface (GUI) screen
Wall Paper (Wall paper)
Use this feature to display the wall paper or gray
background in your video monitor when there is no video
signal being input.
Choice
None Does not display any background in your video
monitor.
Yes Display a background image (the photograph of
a piano) in your monitor when there is no video
signal being input.
Gray Display a gray background in your monitor
when there is no video signal being input.
Note
When "Conversion" is set to "Off", no background is displayed
even if "Wall Paper" is set to "Yes".
88
En
Functions

Manual Setup (Basic)

Use this menu to manually adjust any speaker setting.
Set the operation mode selector to D AMP
1
and then press G SET MENU on the remote
control.
2
Press 4 k / n to select "Manual Setup" and
then press 4 h.
3
Press 4 k / n / l / h to select "Basic" and
then press 4 h.
4
Select the desired parameters and then press
4 h to access and adjust.
y
• Most of the parameters described in the basic menu are set
automatically when you run "Auto Setup". You can use the
basic menu to make further adjustments, but we recommend
running "Auto Setup" first.
• You can reset these parameters by performing the "Auto Setup"
procedure (see page 37).
• If your subwoofer can adjust the output volume and the
crossover frequency, set the volume to about half way (or
slightly less) and set the crossover frequency to the maximum.
Test Tone (Test tone)
Turns the test tone output on or off for "Speaker Set",
"Speaker Distance", and "Speaker Level" settings.
Choice
Off
This unit does not output the test tone for the
"Speaker Set", "Speaker Level", and "Speaker
Distance" settings.
On
This unit outputs the test tone for the "Speaker
Set", "Speaker Level", and "Speaker Distance"
settings.
y
If you use a handheld sound pressure level meter, hold at arm's
length and point upwards so that the meter is in the listening
position. With the meter set to the 70 dB scale and to C SLOW,
calibrate each speaker to 75 dB.
Notes
• Loud test tones will be output when "On" is selected. In this
case, make sure no children are present in the listening room.
• This function is automatically turned off if you exit "Basic".
Speaker Set (Speaker settings)
Use to manually adjust any speaker setting.
y
If you are not satisfied with the bass sounds from your speakers,
you can change these settings according to your preference.
Functions