Mitsubishi Electric apricot ls/vs550 Owner's Handbook Manual page 50

S y s t e m B I O S a n d S e t u p
System Summary
Devices and I/O ports
6/4 LS/VS550 OWNER'S HANDBOOK
The Save Settings options saves any changes that you have made so far.
The Restore Settings option restores the settings that were in effect
when you started the BIOS Setup utility (with the notable
exception of the Date and Time settings).
The Load Default Settings option restores the BIOS default
settings.
Caution Caution
The BIOS defaults may not be appropriate for your particular system.
Make a note of ALL the current settings before using the Load Default
Settings option or pressing F10.
This page cannot be edited, but gives a summary of the system main
settings. Changes made in other pages will be reflected here. Make a
note of the information on this page before you progress any
further, or make any changes.
Serial ports A & B (COM1 & COM2)
This allows you to select the I/O ports and interrupts used by the
two serial ports. The system will normally auto-configure, so it is
best to leave these at the default settings.
Parallel port
This allows you to set the I/O port and interrupt used by the
parallel port. It should be left at 'Auto-configure' unless required to
be set to one of the following:
Parallel Port Mode
Standard
Extended Bi-directional
EPP
ECP
Description
Used for output only.
Simple two-way data.
Enhanced Parallel Port mode.
Extended Capabilities Port mode.