Forced Operation - NEC RSC1711 Owner's Manual

FORCED OPERATION

Operation procedures when the remote controller
can't be used.
Open the front panel upward and press the Forced
Operation Button.
If you want to stop operation, press again. During Forced
operation, the operating conditions are automatically set
as follows:
Cooling Model
Operating mode
FAN Speed
Set Temp.
Open the front
panel upward
Helpful information
Airflow speed and cooling capacity
The cooling capacity indicated in the specification is the
value when the fan speed is set to high, and the capacity
will be lower at low or medium fan speed.
High fan speed is recommended when you wish to cool the
room quickly.
Room Temp ≥ 24°C
Cooling Cooling
High High
22°C 22°C
Forced
Operation Button
Heat pump Model
21°C < Room Temp ≤ 24°C Room temp < 21°C
Soft Dry
Soft Dry Rule
Air Intake Temperature.
Press the Forced Operation Button.
• Press the Forced Operation Button
once again to stop operation.
— 20 —
Heating
High
24°C