NEC RSC1711 Owner's Manual page 12

⁄DHeating Operation Mode (Heat pump model only)
( LED lamp ON)
Press the Start/Stop Button.
1
Select Heating Operation.
2
Press the Operation Mode Selection Button.
Each time the button is pressed, the operation mode is shifted in the arrow direction.
Set the temperature.
3
Set the fan speed.
4
Operation Display
Soft Dry Operation
Cooling Operation
• Each time the button is pressed, the fan speed is altered.
— 12 —
• Two short beeps will sound and
the operation lamp will light up.
Auto Operation
• The temperature can be set
within a range of 16°C~30°C by
1°C.
To raise the Temperature
To lower the Temperature
• Select the fan speed in four steps
-low, medium, high, AUTO.
• The display shows high fan speed.
Heating Operation
(Heat pump model only)