Remote Controller Preparation - NEC RSC1711 Owner's Manual

(5) Remote Controller Preparation

How to store the remote controller
Pull the left and the right side to open the
1
front panel upward.
Store the remote control.
2
(Remove for use.)
Press the left and the right side to close
3
the front panel.
How to insert batteries
Remove the battery cover from the remote
1
controller.
• Slide the cover according to the arrow
direction.
Insert the two batteries.
2
• Be sure that the (+) and (-) directions are
correct.
• Be sure that both batteries are new.
Re-attach the cover.
3
• Slide it back into position.
How to mount onto a wall
Use the screws to secure the holder to
1
the wall.
2 To attach the remote controller to the
holder.
To remove.
3
RESET
RESET
RESET
— 7 —
Confirm that the remote
control signals can reach
the signal receptor of unit.
• Do not use rechargeable
batteries, such batteries
differ from standard dry
cells in shape, dimensions,
and performance.
• Romove the batteries from
the remote controller if the
air conditioner is not going
to be used for some long
time.