Forced Operation; Operation Details - NEC RSH2423S Owner's Manual

(1) A30045A(w fl+) 1994.10.12 12:37 PM '. 3 3 18
Slide Switch Operation

FORCED OPERATION

Operation procedures when the remote control can't be
used.
Open the front panel upward and move the Slide Switch to
the Forced Operation position.
If you want to stop operation, move the Slide Switch to the
Auto Restart or the Remote Control position.
In case the power comes on again after power failure on
the Forced Operation position, the operating conditions are
automatically set as follows:
During Forced Operation, the initial mode continues.
Operating mode
Indoor FAN Speed
Setting Temperature
AUTO RESTART
In case the power comes on again after a power failure, Auto
Restarting Operation is the function to operate procedures
automatically to the previous operating conditions.
In case the air conditioner does not receive any signal from the
remote control, it will turn off automatically after 7 hours.
If you want to use this operation, Open the front panel upward
and move the slide switch to the Auto Restart position.
If you do not want to use this operation, move the Slide Switch
to the Remote Control position.

Operation Details

Natural wind by the CHAOS logic
Helpful information
Fan speed and cooling capacity.
The cooling capacity indicated in the specification is the value when
the fan speed is set to high, and the capacity will be lower at low or
medium fan speed.
High fan speed is recommended when you wish to cool the room
quickly.
Cooling Model
Room Temp. ≥ 24°C
Cooling Cooling
High High
22°C 22°C
For more fresh feeling than other fan speed, press the Indoor Fan
Speed Selector and set to CHAOS mode. In this mode, the wind
blows like natural breeze by automatically changing fan speed
according to the CHAOS logic.
Slide
Switch
Open the front
panel upward
Heat pump Model
21°C ≤ Room Temp. < 24°C
Healthy Dehumidification
Healthy Dehumidification Rule
23°C
Slide
Switch
Open the front
panel upward
When you are out for a while, put the Slide
Switch on the REMOTE CONTROL.
18
Slide Switch
FORCED
OPERATION
AUTO
RESTART
REMOTE
CONTROL
Room Temp. < 21°C
Heating
High
24°C
Slide Switch
FORCED
OPERATION
AUTO
RESTART
REMOTE
CONTROL