NEC RSC1711 Owner's Manual page 9

⁄ACooling Operation Mode
( LED lamp ON)
1 Press the Start/Stop Button.
Select Cooling Operation.
2
Press the Operation Mode Selection Button.
Each time the button is pressed, the operation mode is shifted in the arrow direction.
Set the temperature
3
lower than the room
temperature.
Set the fan speed.
4
Operation Display
Cooling Operation Soft Dry Operation
Each time the button is pressed, the fan speed mode is
altered.
— 9 —
• Two short beeps will sound and the
operation lamp will light up.
Auto Operation
• The temperature can be set
within a range of 18°C ~ 30°C by
1°C .
To raise the Temperature
To lower the Temperature
• Select the fan speed in four steps
-low, medium, high, AUTO.
• The display shows high fan
speed.
Heating Operation
(Heat pump model only)