Maintenance; Cleaning And Storage; Battery Replacement - Extech Instruments MA430 User Manual

400amp ac clamp meter + ncv
Hide thumbs Also See for MA430:
Table of Contents

Advertisement

Maintenance

WARNING: To avoid electrical shock, disconnect the meter from any circuit, remove the test leads
from the input terminals, and turn OFF the meter before opening the case. Do not operate the meter
with an open case.

Cleaning and Storage

Periodically wipe the case with a damp cloth and mild detergent; do not use abrasives or
solvents. If the meter is not to be used for 60 days or more, remove the battery and store it
separately.

Battery Replacement

1.
Remove the Phillips head screw that secures the rear battery cover
2.
Open the battery compartment
3.
Replace the 9V battery.
4.
Secure the battery compartment door
Never dispose of used batteries or rechargeable batteries in household waste.
As consumers, users are legally required to take used batteries to appropriate
collection sites, the retail store where the batteries were purchased, or wherever
batteries are sold.
Disposal: Do not dispose of this instrument in household waste. The user is obligated
to take end-of-life devices to a designated collection point for the disposal of electrical
and electronic equipment.
Other Battery Safety Reminders
o Never dispose of batteries in a fire. Batteries may explode or leak.
o Never mix battery types. Always install new batteries of the same type.
netzerotools.com
8
netzerotools.com
MA430-EU-EN V1.1 3/13

Advertisement

Table of Contents
loading

Table of Contents