Drain Valve Removal - Henny Penny 581 Service Manual

Henny Penny

5-29. DRAIN VALVE REMOVAL

Step 3
Step 4
5-30. NYLATRON SLIDES
Replacement
Step 2
5-28
Find the drain valve underneath the cookpot, in the back of
the fryer. Open the drain by pulling the red knob in the front of
the fryer, allowing the shortening to drain from the cookpot.
1. Drain the shortening from the cookpot.
2. Remove right side panel of fryer.
3. Remove the two cotter pins from the drain valve fitting and
pull extension from the valve.
4. Unscrew the drain shield from the valve.
5. Unscrew drain valve from the cookpot.
6. Replace new drain valve in reverse order.
The Nylatron slides fill the gap in the shroud behind the lid.
1. Remove Cooking Rack and baskets from lid and raise lid.
2. Remove one of the tru-arc rings from the lid pin and pull
the pin from the fryer.
3. Lift the lid from the unit.
The lid weighs 80 lbs. Take care when lifting the lid to
prevent personal injury.
Model 581
801