SMC Networks SMCGS501P User Manual page 7

C A
LASS
This digital apparatus does not exceed the Class A limits for radio noise
emissions from digital apparatus as set out in the interference-causing
equipment standard entitled "Digital Apparatus," ICES-003 of the Department of
Communications.
Cet appareil numérique respecte les limites de bruits radioélectriques
applicables aux appareils numériques de Classe A prescrites dans la norme sur
le matériel brouilleur: "Appareils Numériques," NMB-003 édictée par le ministère
des Communications.
P
LEASE READ THE FOLLOWING SAFETY INFORMATION CAREFULLY BEFORE
INSTALLING THE
ARNING: Installation and removal of the unit must be carried out by qualified
W
personnel only.
This guide is intended for use by network administrators who are
◆
responsible for setting up and installing network equipment; consequently it
assumes a basic working knowledge of LANs (Local Area Networks).
The unit must be connected to an earthed (grounded) outlet to comply with
◆
international safety standards.
Do not connect unit to an A.C outlet (power supply) without an earth
◆
(ground) connection.
The socket outlet must be near to the unit and easily accessible. You can
◆
only remove power from the unit by disconnecting the power cord from the
outlet.
This unit operates under SELV (Safety Extra Low Voltage) conditions
◆
according to IEC 60950. The conditions are only maintained if the
equipment to which it is connected also operates under SELV conditions.
S P
AFETY RECAUTIONS
Read the following information carefully before operating the device. Please
follow the following precaution items to protect the device from risks and
damage caused by fire and electric power:
Use the power adapter that is included with the device package.
◆
S :
WITCH
C
OMPLIANCES AND
– 7 –
S S
AFETY TATEMENTS