SMC Networks SMCGS501P User Manual page 6

CE M D
ARK ECLARATION OF
Declaration of Conformity (DoC) can be obtained from www.smc.com -> support
-> download
This information technology equipment complies with the requirements of the
Council Directive 89/336/EEC on the Approximation of the laws of the Member
States relating to Electromagnetic Compatibility and 73/23/EEC for electrical
equipment used within certain voltage limits and the Amendment Directive 93/
68/EEC. For the evaluation of the compliance with these Directives, the following
standards were applied:
RFI Emission: ◆
◆
◆
Immunity: ◆
◆
◆
◆
◆
◆
◆
◆
LVD: ◆
We hereby certify that this product has been tested by SMC and complies with
FCC official limits. The product can be marketed in the US in accordance with
FCC Rules based on standards 47 CFR Part 2 and Part 15 Class A Equipment
Regulations. The tests were performed in accordance with the procedures from
ANSI C63.4-2009. The test data and results are issued on test report no.
ACSF13133.
C
ONFORMANCE FOR
Limit according to EN 55022:2010
Limit for harmonic current emission according to EN 61000-3-
2:2006+A1:2009 + A2:2009
Limitation of voltage fluctuation and flicker in low-voltage supply
system according to EN 61000-3-3:2008
Product family standard according to EN 55024:2010
Electrostatic Discharge according to IEC 61000-4-2: 2008
Radio-frequency electromagnetic field according to IEC 61000-4-3:
2010
Electrical fast trsnsient/burst according to IEC 61000-4-4: 2012
Surge immunity test according to IEC 61000-5: 2005
Immunity to conducted disturbances, Induced by radio-frequency
fields: IEC 61000-4-6: 2008
Power frequency magnetic field immunity test according to IEC
61000-4-8: 2009
Voltage dips, short interruptions and voltage variations immunity test
according to IEC 61000-4-11: 2004
EN60950-1:2006+A11:2009+A1:2010+A12:2011
C
OMPLIANCES AND
EMI
– 6 –
S S
AFETY TATEMENTS
S (EEC)
AND AFETY