Side Stand - Honda XL125L Manual

1. Check that the side stand operates
smoothly. If the side stand is stiff or
squeaky, clean the pivot area and
lubricate the pivot bolt with clean grease.
2. Check the spring for damage or loss of
tension.
XR150LEK-NZ type
3. Sit on the motorcycle, put the
transmission in Neutral, and raise the side
stand.
4. Start the engine, pull the clutch lever in,
and shift the transmission into gear.
5. Lower the side stand all the way. The
engine should stop as you lower the side
stand. If the engine doesn't stop, have
your motorcycle inspected by your dealer.

Side Stand

Checking the Rubber Pad
u
Checking the Rubber Pad
Except XR150LEK-NZ type
Check the rubber pad for deterioration and
wear. Replace if wear extends to any point of
the wear line.
If necessary have the rubber pad replaced by
your dealer.
Good
Wear line
Rubber pad
Replace
71