Battery - Honda XL125L Manual

Battery

Negative terminal
Battery
holder
Collar
Bolt
Battery
Positive terminal
Removing & Installing Body Components
❙
Removal
Make sure the ignition switch is off.
1. Remove the left side cover.
2. Remove the bolt and collar.
3. Remove the battery holder.
4. Disconnect the negative
the battery.
5. Disconnect the positive
the battery.
6. Remove the battery taking care not to
drop the terminal nuts.
❙
Installation
Install the parts in the reverse order of
removal. Always connect the positive
terminal first. Make sure that bolts and nuts
are tight.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
Battery
u
P. 54
2
terminal from
-
terminal from
+
+
P. 43
2
P. 91
2
55