Spray Arms - Siemens SN... Operating Instructions Manual

en Cleaning and maintenance

Spray arms

Limescale and contaminants in the
rinsing water may block nozzles and
bearings on the spray arms 1B and
1J.
1. Check outlet nozzles on the spray
arms for blockages.
2. Unscrew the upper spray arm 1B.
3. Remove the lower spray arm 1J
upwards.
4. Clean spray arms under running Clean spray arms under running Clean spray arms under running
water.
5. Re-engage or screw on spray arms. Re-engage or screw on spray arms. Re-engage or screw on spray arms.
26