Standard Adjustment
(2) Adjusting the position of the moving knife
Adjust the position so that the distance between the thread trimming connecting plat (front) and the edge of
the slot in the throat plate should be 12 to 13 mm when the button clamp is at its highest position.
2
1
6
3
5
8
4
9
7
(3) Adjusting the height of the thread separating claw of the moving knife
Make adjustment so that the clearance between the thread separating claw 1 and the looper 2 should
become 0.5 to 0.7 mm.
Top end of thread separation nail
0.5 to 0.7 mm
1
2
12
−
−