Package Contents; Minimum Requirements - TRENDnet TPE-S44 Quick Installation Manual

1. Before You Start

Package Contents

Ÿ TPE-S44
Ÿ Quick Installation Guide
Ÿ
Power Cord
Ÿ
Power Adapter (48V DC, 800mA)
If any of the above contents are missing, please contact your reseller.

Minimum Requirements

Ÿ Computer with network adapter installed
Ÿ Cat. 5, Cat. 5e or Cat. 6 RJ-45 network cable
Ÿ
The surface must support at least 430g for the Switch
Ÿ The power outlet should be within 1.82m (6ft) of the Switch
Ÿ
Visually inspect the DC power jack to make sure that it is securely
connected to the power adapter
Ÿ
Make sure that there is proper heat dissipation and adequate ventilation
around the Switch
Ÿ Do not place heavy objects on the Switch
Ÿ IEEE 802.3af Poe Device
Ÿ TPE-112GS (Optional)
Note: The TPE-S44 only supports Powered Devices that follow the IEEE
802.3af standard
1