TRENDnet TPE-S160 Specifications

FEATURES
• 16 x 10/100/1000Mbps Auto-MDIX RJ-45 PoE portsOn/off power switch
• IEEE 802.3af Power over Ethernet (PoE) compliant
• Supports PoE Powered Device (PD) classifi cation
• Provides 15.4 watts per PoE port
• 3.2Gbps switching fabric
• Full wire-speed non-blocking reception and transmission
• Store-and-forward switching method
• Back pressure Flow Control for half-duplex mode
• IEEE 802.3x Flow Control for full-duplex mode
• 1.5Mbits RAM Data Buffer
• 4K MAC address entries
• Diagnostic LEDs (Power, Link/Activity, PoE Act/Status)
• Plug and Play
• Sturdy 19" wide metal enclosure
• Rack mounting hardware included
• 3-year limited warranty
16-Port 10/100Mbps PoE Switch
TPE-S160(V1.0R)
The 16-Port 10/100Mbps PoE Switch, model TPE-S160, reduces
equipment and installation costs by delivering data and power over
existing Ethernet cables to Power over Ethernet (PoE) enabled
devices such as Access Points and IP Cameras. Boost offi ce
effi ciency and reduce network congestion with a total switching
capacity of 3.2Gbps.
LED indicators display device status for easy power management and
troubleshooting. An internal power supply reduces clutter and delivers
15.4 Watts to each PoE port. A convenient on/off button is located on
the back of the switch. Non-PoE devices can connect to the
switch—auto-sensing PoE technology cuts power to non-PoE
connected devices. Use TRENDnet's PoE Splitter to install non-PoE
devices in remote locations.
TPE-S160
rev: 04.20.2011